Applications of RTV-2 molding silicon rubber:

RTV-2 molding silicon rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc

Features of RTV-2 molding silicon rubber

1. Good characteristics of easy-operation

2. Ligh viscosity and good flowability

3. Low shrinkage

4. Favorable tension

5. No deformation

6. High temperature resistance, acid and alkali-resistance and ageing resistance

Why is the appearance of the finished mold striate and unsmooth?

It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.

For getting further information about RTV-2 molding silicon rubber, PLS contact with Miss Nancy

Mob: 86-18938867585

Skype: nancy19870715

Applications of Condensation RTV silicone rubber

Tin casting silicone rubber for statue mold making ,candles.

RTV -2 molding silicone rubber is application for plastic toys, relieve furniture.

liquid RTV silicone rubber is used for architectural decoration, funiture decorative.

RTV silicone rubber is application for sculpture, art crafts mold making and so on.

Features of Condensation RTV silicone rubber

Condensation RTV silicone rubber for statue mold making is flowing liquid with general hardness of 22-50A° after curing with features:

1. resistance to deformation and high-temperature, acid-alkali and expansion

2. good tensile strength, tear strength and elongation

3. high reproduction times

Datasheet of Condensation RTV silicone rubber

Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)

628
White
14000~16000
25~28
≥35
≥25
≥500
2~3
0.5
2~4
 

Model
Appearance
Viscosity (cs)
Hardness (Ao)
Tensile Strength (kgf/c)
Tear Strength (kgf/)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)

638
White, red
20000-22000
33-35
≥49
≥32
≥470
2~3
0.5
2~4

 

Any more information of Condensation RTV silicone rubber, please feel free to contact Nancy Feng

Tel: 0086-755-85224692

Fax: 0086-755-89948030

Mob:86-18938867585

Applications of addition cure silicon rubber for molds:

addition cure silicon rubber for molds is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc

Features of addition cure silicon rubber for molds:

1. Good characteristics of easy-operation

2. Ligh viscosity and good flowability

3. Low shrinkage

4. Favorable tension

5. No deformation

6. Favorable hardness

7. High temperature resistance, acid and alkali-resistance and ageing resistance

FAQ of addition cure silicon rubber for molds:

Why is the silicon mold oily?

The molding silicone rubber itself doesn’t contain any oil, so it won’t be oily. If the mold is oily, it may be because you add the compound silicone oil( the compound of silicon oil and white oil). The white oil is not silicon oil but a kind of petrochemicals.

For getting further information about addition cure silicon rubber for molds, PLS contact with Miss Nancy

Mob:86-18938867585

Skype: nancy19870715

Applications of Liquid silicone rubber:

Liquid silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc

Features of Liquid silicone rubber:

1. Good characteristics of easy-operation

2. Ligh viscosity and good flowability

3. Low shrinkage

4. Favorable tension

5. No deformation

6. Favorable hardness

7. High temperature resistance, acid and alkali-resistance and ageing resistance

FAQ of Liquid silicone rubber:

Why should the liquid silicone mold be reused only for a few times?

It can be due to the following reasons:

a. Adding too much silicone oil in to silicon rubber.

b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs .

For getting further information about Liquid silicone rubber, PLS contact with Miss Nancy

skpy:nancy19870715

Website : www(dot)szrl(dot)net

Mob:86-18938867585