manual mold silicone rubber applications:

Mold silicon rubber silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, plaster fireplace mold making etc.

manual mold silicone rubber features description:

The manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.

manual mold silicone rubber operations:

Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours.

(Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.)

If you want to get further information about our manual mold silicone rubber product,

PLS contact Ms Vicky Lim:

TEL: 0086 -755 - 89948013

FAX: 0086 -755 - 89948030

Mobile: 0086 -18938867569

E-mail: hyz (at) szrl (dot) net
 

pad printing silicone rubber applications:

The pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicone pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface.

pad printing silicone rubber features description:

Pad printing silicone rubber with high print times and abrasion resistance, without any inpurities, with good printing effects, permanent and durable, we can provide all kinds of colors and our catalyst is free charged.

pad printing operation silicone rubber instructions:

Pad printing silicone rubber is two-component silicone, part A is the liquid silicone rubber, part B is the catalyst. The usual mxing ratio for silicone rubber and catalyst is 100 : 2-3, eg. we take 100grams of liquid silicone rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.

Any more information about pad printing silicone rubber, please feel free to contact Ms Vicky Lim:

Web:www(dot)szr(dot)net
Tel: 86-755-89948013
Mob: 86-18938867569

Fax: 86-755-89948030

E-mail: hyz (at) szrl (dot) net
 

FEATURES of Liquid silicone rubber for making mould :

1. Two-part of Liquid silicone rubber: flowable liquid silicon and curing agent.

2. Liquid silicone rubber Cures at room temperature within 5-46hours.

3. Liquid silicone rubber has An exceptional fluidity and good operability.

4. Liquid silicone rubber has good Temperature and deformation resistance as well as low shrinkage.

5. Liquid silicone rubber has High duplication times.

Operations for Liquid silicone rubber for making mould:

Step One to use Liquid silicone rubber: Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.

Step Two to use Liquid silicone rubber: vacuum pumping

Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.

Step Three to use Liquid silicone rubber: Brushing cast & Perfusion Molding operation.

Similar models of Liquid silicone rubber HY6:

model Liquid silicone rubber HY620

model Liquid silicone rubber HY625

model Liquid silicone rubber HY628

model Liquid silicone rubber HY630

model Liquid silicone rubber HY638

model Liquid silicone rubber HY640

SHELF LIFE of Liquid silicone rubber for making mould:

Liquid silicone rubber's shelf life is Twelve(12) months from date of shipment when stored at 24 C in original unopened packages.

Any questions of Liquid silicone rubber, please feel free to contact Ms Vicky:
TEL: 0086-755-89948013
FAX: 0086-755-89948030
MOBILE: 0086-18938867569

E-mail: hyz (at) szrl (dot) net

Introduction of RTV 2 molding silicone rubber for ornament :

Two-part of RTV 2 molding silicone rubber: flowable liquid silicon and catalyst.
RTV 2 molding silicone rubber cures at room temperature within 4-6 hours.
 

Application of RTV 2 molding silicone rubber for ornament :

RTV 2 molding silicone rubber is mainly applied for making various molds:

RTV 2 molding silicone rubber can used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.

RTV 2 molding silicone rubber can used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.

RTV 2 molding silicone rubber can also used to reproduce soaps, candle & lighting.

FEATURES of RTV 2 molding silicone rubber for ornament :

RTV 2 molding silicone rubber has an exceptional fluidity and good operability.
RTV 2 molding silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
RTV 2 molding silicone rubber has High duplication times.
 

Operation step for RTV 2 molding silicone rubber for ornament :

Step One to use RTV 2 molding silicone rubber: Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
 

Step Two to use RTV 2 molding silicone rubber: vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
 

Step Three to use RTV 2 molding silicone rubber: Brushing cast & Perfusion Molding operation.
 

silicone rubber RTV-630#:

Usage: Silicon rubber for PU/poly resin products, plaster, candles, gypsums crafts, cement products, concrete/architectural products, statuary, casting molds making, etc.

Any questions of RTV 2 molding silicone rubber, please feel free to contact Ms Vicky:

TEL: 0086-755-89948013

FAX: 0086-755-89948030

MOBILE: 0086-18938867569

E-mail: hyz (at) szrl (dot) net